Shelf technology and safety factor:
货架构件采用钢板轧制而成,强度及刚性符合机械工业标准.二氧化碳气体保护焊,自动焊接.配件在喷油前经过除油、除锈、酸洗、磷化四道工序处理.180度环氧树脂电喷粉(polyester powder coating),一般为60-80微米.
The shelf components are rolled from steel plates, with strength and rigidity in line with the mechanical industry standards. The components are welded automatically under the protection of carbon dioxide. The accessories are treated by four processes before oil spraying, rust removal, acid pickling and phosphating. The 180 degree epoxy powder coating is generally 60-80 microns.
The bending ratio of the beam after bearing is 1:200 of the length, the tolerance is 10%, and the safety factor after bearing is 1.5 times. Http://www.yundahuojia.com